DAPS-2880-090-RS3-F16 Festo ⍾ 549695 ⍾ DAPS2880090RS3F16

Semi-rotary drive; Size of actuator : 2880; Flange hole pattern : F16; Swivel angle : 90 deg; End-position adjustment range at 0° : -5 ... 5 deg; End-position adjustment range at 90° : 85 ... 95 deg; Shaft connection depth : 49.5 mm; Fitting connection conforms to standard : ISO 5211; Cushioning : No cushioning; Assembly position : Any; Mode of operation : single-acting; Design structure : Yoke kinematics; Position detection : No; Closing direction : right-closing; Valve connection conforms to standard : VDI/VDE 3845 (NAMUR); Safety Integrity Level (SIL) : Product can be used in SRP/CS up to SIL 2 (high demand)Product can be used in SRP/CS up to SIL 2 low demand; Supply pressure for spring strength : 4.2 bar; Nominal operating pressure : 5.6 bar; CE mark (see declaration of conformity) : to EU directive explosion protection (ATEX); ATEX category Gas : II 2G; ATEX category Dust : II 2D; Explosion ignition protection type Gas : Ex h IIC T6...T3 Gb X; Explosion ignition protection type Dust : Ex h IIIC T85°C...T200°C Db X; Explosion-proof ambient temperature : -20°C <= Ta <= +60°C; Note on operating and pilot medium : Lubricated operation possible (subsequently required for further operation); Corrosion resistance classification CRC : 3 - High corrosion stress; Torque at rated operating pressure and 0° rotation angle : 3,360 Nm; Torque at nominal operating pressure with 50° swivel angle : 1,800 Nm; Torque at nominal operating pressure with 90° swivel angle : 2,640 Nm; Note about the torque : The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling.; Spring return torque with 0° swivel angle : 1,440 Nm; Spring return torque with 50° swivel angle : 1,080 Nm; Spring return torque at 90° : 2160 Nm; Spring strength : 3; Air consumption at 6 bar per cycle 0°-90°-0° : 147 l; Shaft connection : T46; Pneumatic connection : G3/8; Materials note : Conforms to RoHS; Material cover : Wrought Aluminium alloy; Material seals : FPMNBRPUR; Material screws : High alloy steel; Material shaft : High alloy steel; Material number for shaft : 1.4305

Operating pressure

4.2 ... 8.4 bar

Media type

Compressed air in accordance with ISO8573-1

Body material

Wrought Aluminium alloy

Ambient temperature (operation)

-20 ... 80 °C

Weight

117,000 g