DSMI-63-270-A-B Festo ⍾ 1202485 ⍾ DSMI63270AB

Semi-rotary drive; Rotation angle adjustment range : 0 ... 270 deg; Stroke shortening in the end-positions : 5 °; Smallest positioning stroke : 5° for positioning, 15° with Soft Stop; Piston diameter : 63 mm; Swivel angle : 0 ... 272 deg; Cushioning : P: Flexible cushioning rings/plates at both ends; Mounting position, positioning : Any; Mounting position, soft stop : Horizontal; Measuring method: displacement encoder : Analogue; Design structure : Drive shaft with ball bearing, Rotary vane; Position detection : For proximity sensor, With integrated angular displacement encoder; Operating pressure, positioning / soft stop : 4 ... 8 bar; Max. swivel frequency at 6 bar : 1 Hz; Max. travel speed : 2,000 deg/s; Min. travel speed : 50 deg/s; Typical short stroke positioning time, horizontal : 0,36/0,55 s; Typical long stroke positioning time, horizontal : 0,64/1 s; Connection resistance : 5 kOhm; Recommended wiper current : < 1 µA; Mode of operation : double-acting; Max. operating voltage, DC : 42 V; Max. intermittent wiper current : 10 mA; Max. current consumption : 4 mA; Nominal operating voltage DC : 10 V; Connection resistance tolerance : 20 %; Permissible voltage fluctuation : < 1 %; CE mark (see declaration of conformity) : to EU directive for EMC; Note on operating and pilot medium : Lubricated operation not possible; Continuous shock resistance per DIN/IEC 68, parts 2 - 82 : Tested in accordance with severity level 2; Corrosion resistance classification CRC : 0 - No corrosion stress; Vibration resistance per DIN/IEC 68, parts 2 - 6 : Tested in accordance with severity level 2; Impact energy in end positions : 0.1 Nm; Max. axial force : 500 N; Max. mass moment of inertia, horizontal : 0.6 kgm2; Max. mass moment of inertia, vertical : 0.6 kgm2; Max. radial force : 500 N; Min. mass moment of inertia, horizontal : 0.03 kgm2; Min. mass moment of inertia, vertical : 0.03 kgm2; Theoretical torque at 6 bar : 40 Nm; Angle resolution : <= 0.1 deg; Output signal : Analogue; Independent linearity : 0,0025; Repetition accuracy, positioning : +/- 0,3 deg; Repetition accuracy, soft stop end-position : < 0,2 deg; Repetition accuracy, soft stop intermediate position : +/- 2 deg; Electrical connection, displacement encoder : 4-pin; Cable length : 30 m; Pneumatic connection : G1/4; Material of measuring system housing : Wrought Aluminium alloy, Anodised; Materials note : Free of copper and PTFE, Conforms to RoHS; Material stop lever : Wrought Aluminium alloy, Anodised; Material of drive shaft : SteelNickel plated; Material fixed stop : Steel; Material measuring system coupling : NBR; Material woodruff key : Steel; Material swivel vane : PET-reinforced; Material connector housing : PA-reinforced; Material cylinder barrel : Wrought Aluminium alloy

Media type

Compressed air in accordance with ISO8573-1

Body material

Wrought Aluminium alloy, Anodised

Degree of protection

IP65, to IEC 60529

Mounting type

with internal (female) thread

Ambient temperature (operation)

-10 ... 60 °C

Weight

6,900 g